FacebookYoutubeShare icon
Header Logo

FacebookYoutubeShare
CATALOGUE/BATTERY FOG MACHINES/BASE-GUARD 24 V WALL MOUNT W/ BATTERY
 
BASE-GUARD 24 V WALL MOUNT W/BATTERY
Battery-operated safety fog machine.
 
Base-guard 24V machine.
The Base-Guard 24V Wall mount is a battery-operated safety fog machine that can be used in rooms up to 200 m³. Offices, shops, petrol stations, production rooms, or storage rooms can be protected by the device. Thanks to its unique evaporator technology, the Base-Guard 24V Wall Mount has an extremely low power consumption in standby mode, but is still heated up in under two seconds and produces thick white fog. Active for up to 4 weeks without power. The Base-Guard 24V Wall Mount has an interface card with numerous inputs and outputs so that it can be connected to a wide variety of alarm systems. The integrated battery pack is equipped with lead-gel batteries and provides up to 4.5 minutes of fog duration. The integrated charger charges the battery within six hours. The fluid tank contains 600ml of highly concentrated special fluid, which creates a very dense, harmless mist. The tank is integrated into the device and is sufficient for up to 6 minutes of continuous fog. The fog outlet nozzle can be swiveled and adjusted between 0 and 60°. A PC interface enables parameterization and readout of the internal logbook.
 
 
Base wall mount 24v product pdf file.Product PDF File
 
FEATURESSPECIFICATIONSGALLERYRELATED PRODUCTS

FEATURES
Active for up to 4 weeks without power
 
 
• Unique evaporator technology.
• Produces thick white fog.
• Up to 4.5 minutes of fog duration.
SPECIFICATIONS
Evaporator fog machine
 
 
Power
3000 watts
Battery pack
Lead-gel battery, 24 V, 22 Ah
Mains connection
90-264 V (47-63 Hz), 120 W.
Standby time without network
4 weeks
Heating time
<2 seconds
Fluid consumption
95 ml/min or 3.2 oz/min
Tank capacity
600 ml or 20.2 oz
Control
Activation, triggering, verification, two triggers, BMA
Outputs
Triggered, sabotage, ready for operation, error (battery monitoring, power failure, no fluid, internal error)
Sensors
Fluid sensor, sabotage, battery monitoring
Programming
PC via USB
Fog time
programmable
Logbook memory
64 temporary entries, 64 permanent entries
Dimensions (L x W x H)
550 x 326 x 118 mm or 21.6 x 12.8 x 4.6 inches
Weight
27 kg or 59.5 lbs
GALLERY
It can be used in rooms up to 200 m³. Offices, shops, petrol stations, production rooms, or storage rooms can be protected by the device.
 
 
Base-Guard 24V Wall Mount image 1.
Base-Guard 24V Wall Mount image 2.
RELATED PRODUCTS
Related products, options, and accessories
 
 
GuardInspector software
GuardInspector
The GuardInspector is an application for Windows to configure the Base-Guard from a PC or Notebook. With this Software, it is possible to test the ins & the outputs and to set the triggering actions. Moreover the internal journal can be read by the GuardInspector.
System requirements
Operating system: at least Windows 7 (64-bit)
Memory space: 20 MB.
Radio remote control
Radio Remote Control
Frequency: 433,62 MHz
Functions: activate and deactivate
Range: 5 m
Battery: 12 V Alkaline
Size (L x W x H): 65 x 36 x 15 mm
Tank lid
Tank Lid With Sensor
Function: level sensor
Principle: optical
Voltage: 5 V DC (from sensorbus)
Interface: Sensorbus
Size (Ø x H): 51 x 21 mm
Base-Guard Fluid by Hazebase in Miami.
Base-Guard Fluid
Available sizes: 600ml for the 24V series or 55ml for the 12V series.