FacebookYoutubeShare icon
Header Logo
Powerful, battery-operated safety fog machine.
Base-guard 12V machine.
The Base-Guard 12V is a powerful, battery-operated safety fog machine for use in vehicles, money transporters, caravans, mobile homes, yachts, containers, construction machinery, etc. Thanks to its unique evaporator technology, the Base-Guard 12V has extremely low power consumption in standby mode. In less than two seconds heat up produces a thick white fog. Active for up to 3 months without reloading. (in connection with Base-Guard Battery) It's very compact and weighs less than 1.5kg to allow a wide variety of installation options. Numerous inputs and outputs offer the possibility to be connected to the existing alarm system or to be operated as a standalone device. The fluid tank holds 55ml of highly concentrated special fluid, which creates a very dense, harmless mist. The tank is screwed into the device and can be changed without much effort. The content is sufficient for 2.5 minutes of continuous fog. A PC interface enables parameterization and readout of the internal logbook. A fluid sensor, radio remote control, and a modern lithium-ion battery are available.
Base Base Guard 12v product pdf file.Product PDF File

Unique evaporator technology
Active for up to 3 months without reloading.
Compact and weighs less than 1.5kg.
2.5 minutes of continuous fog.
Evaporator fog machine
720 watts
Operating voltage
12 V DC (battery operated)
Heating time
<2 seconds
Standby time
3 months (with 6300mAh battery)
Fluid consumption
20 ml/min or 0.7 oz/min
Tank capacity
55 ml or 1.86 oz
Ignition, activation, release (trigger low or high active)
Status, errors, external devices
Bus system
For fluid sensors and smart batteries
PC via USB
Fog time
Programmable up to 2.5 minutes with 55ml cartridge
Break time
Logbook memory
64 temporary entries, 64 permanent entries
Dimensions (L x W x H)
228 x 175 x 68.2 mm or 9 x 6.9 2.6 inches
1400 g or 3 lbs
Adjustable fog density
Base-guard 12V
Base-guard 12V image 2
Related products, options, and accessories
GuardInspector software
The GuardInspector is an application for Windows to configure the Base-Guard from a PC or Notebook. With this Software, it is possible to test the ins & the outputs and to set the triggering actions. Moreover the internal journal can be read by the GuardInspector.
System requirements
Operating system: at least Windows 7 (64-bit)
Memory space: 20 MB.
Radio remote control
Radio Remote Control
Frequency: 433,62 MHz
Functions: activate and deactivate
Range: 5 m
Battery: 12 V Alkaline
Size (L x W x H): 65 x 36 x 15 mm
Tank lid
Tank Lid With Sensor
Function: level sensor
Principle: optical
Voltage: 5 V DC (from sensorbus)
Interface: Sensorbus
Size (Ø x H): 51 x 21 mm
Product Battery
Battery Pack
Product type: 12V Lead-Gel battery pack
Capacity: 17 Ah
Fuse: 60 A
Circuit breaker: automatic relay 13.6V, 140A
Cable routing: corrugated hose 17mm nominal diameter
Size (L x W x H): 360 x 320 x 95mm
Base-Guard Fluid by Hazebase in Miami.
Base-Guard Fluid
Available sizes: 600ml for the 24V series or 55ml for the 12V series.