CATALOGUE/FOG AND HAZER MACHINES/BASE VERTICAL
 
BASE VERTICAL
The Base Vertical is a stunning effect.
 
Base Vertical haze machine by Haze Base America in Miami.
Designed specifically from demand this unit creates the perfect vertical effect that makes a fantastic impact.

The Base Vertical reaches operation in less than 7 minutes. It can be controlled via DMX using only one channel or built in onboard timer. Wired and wireless controllers are also available.

Hazebase water-based fluid is designed for any environment. From a quick dissipation to a dense fog that will hang in the air. The unit can run continuously at 50%.
 
 

FEATURES
The sky’s the limit
 
 
Control via DMX or a variable stand-alone built in timer or DMX operation.
German made, Amptown Road Case Company designed a rugged housing for the unit and internal pumps are fitted with shock absorption.
The Base Vertical is either an Efficient 1300-Watt 230V/50Hz or 110v/60Hz. Full operation is achievable in less than 7 minutes.
Efficient fluid consumption ranges from 120ml/min at maximum output to 35 ml/min at 1%.
Efficient fluid consumption ranges from 120ml/min at maximum output to 35 ml/min at 1%.
Mounting and control accessories are available for complete versatility for multiple applications.
SPECIFICATIONS
Stand alone mode, Radio remote (Option)
 
 
Power supply
230 V AC, 50 Hz; 110 V AC, 60 Hz optional
Procedure
Vaporizing fog generator
Power requirement
1300 Watt
Warm up time
Approx. 7 min.
Fluid consumption
At max. output 120 ml/min; at cont. output 35 ml/min
Fluid tank capacity
5 Liter
Fog output
Adjustable in steps à 1% ( 0-99)
Fogging time
At 100% output approx. 40 sec; at < 50% output continuous output
Control
DMX 512; 0-10 V analog internal Timer
Temperature control
Microprocessor controlled
Overheating protection
Heater block/Thermostat; pump/thermal switch
Dimensions (L x B x H )
53 x 23 x 24 cm
GALLERY
Designed for any environment
 
 

RELATED PRODUCTS
Related products, options, and accessories
 
 
Base Fog Fluid
Base Fog Fluid has been specially formulated to work in any situation.
Base Wired Remote Control
This rugged remote is easy to set up and use. Connect with several Hasebase machines this simple function controller allows for variable smoke output from a distance from the machine. This controller can be hand-held or mounted. Connect via 3 Pin XLR cable.
Base Wireless Remote Control
This controller is simple but effective. Designed to be used with several machines. Plug the receiver into the 3 Pin XLR remote input and the transmitter is a small hand held that can be taken anywhere in the room. Line of site, this remote can reach distances of over 100 Meters with no cables.